Filtyp
Cooperative content replication and request routing (C2R3) has emerged as a promising technique to enhance the efficiency of content delivery networks (CDN). Most existing approaches to C2R3 focus on efficient bandwidth usage and assume a hierarchical CDN architecture targeted towards the delivery of specific content types (e.g., video). Therefore, C2R3 problem of covering the broad range of conte
The design of a digital baseband for a low power wireless receiver in 65 nm CMOS is presented. It consists of decimation filtering, matched filters for data detection, and preamble based synchronization. The circuit was designed using low threshold devices in both low power (LP-LVT) and general-purpose (GP-LVT) domains. The fabricated circuits were functionally verified, and silicon measurements s
A order 3-bit continuous-time (CT) ΔΣ ADC is presented in this paper. The design equations starting from a discrete-time reference modulator to the circuit implementation are given. The non-return to zero (NRZ) DAC pulses have a half clock cycle loopdelay which is corrected by the feedforward (also known as PI) loop delay compensation, and nonlinearities in the DACs are suppressed by data-weighted
This paper presents a detailed description of a propagation channel measurement campaign performed in a warehouse environment and provide a comprehensive channel model for this environment. Using a vector network analyzer (VNA), we explored both Line-of-sight(LOS) and Non-Line-of-sight (NLOS) scenarios over a 2-8 GHz frequency range. We extracted both small-scale and large-scale channel parameters
In this paper we present an analysis of the effects of antenna placement on the radio channel properties for Vehicle-to-Vehicle communications based on measurements performed in three different propagation scenarios; highway, urban and rural. Four omni-directional antennas were mounted at four different positions: roof, bumper, left-side mirror and inside windscreen of two standard station wagons
The ambitious goal of the upcoming IEEE 802.11ax (HEW) standard for wireless LANs (WLANs) to enhance throughput by four times (and beyond), compared with IEEE 802.11ac, demands a radical improvement of present medium access control (MAC) functionality. To this end, a promising paradigm would be a graceful migration towards new MAC protocols which incorporate higher certainty in their decisions. Ho
The findings from a user study regarding particular ob- servable “interaction patterns” in the interaction during a “guided tour” are summarized in this paper.
There has been extensive research about single link multiple-input multiple-output (MIMO) channels, both simulated and measured, but only few studies have targeted multilink analysis with measured channel data. Hence, in this paper, we analyze the influence of spatial separation of user terminals and the human shadowing effect on the MIMO capacity and to the signal to interference ratio (SIR) in a
Software development organizations are continuously looking for better ways to manage their projects. An emerging approach to achieve this is Inner Source, which refers to the adoption of Open Source development practices within the confines of an organization. With an Inner Source approach, individuals, teams, and departments within an organization can start software projects, very similar to the
With the growing popularity of audio and video communication services on the Internet, network operators, service providers and application developers are becoming increasingly interested in assuring that their services give the best possible experience to the users. Since real-time audio and video services are very sensitive to packet loss, latency and bandwidth variations, the performance of the
Using multiple receivers (microphones or antennas) in a rigid configuration, such as on a smartphone, it is possible to measure time difference of arrival to the receivers. This in turn can be used to determine the direction to the transmissions, if there are at least three receivers. When using two receivers it can be used to determine the angle to the transmissions relative to the line through t
The amount of data in large-scale software engineering contexts continues to grow and challenges efficiency of software engineering efforts. At the same time, information related to requirements plays a vital role in the success of software products and projects. To face the current challenges in software engineering information management, software companies need to reconsider the current models
PLL (Phase Locked Loop) based frequency synthesizers are widely used in the wireless communication field. This paper puts focus on the design and implementation of a 60dB SNR (Signal to Noise Ratio) FM transmitter, which realizes direct frequency modulation of audio signal by utilizing a carrier frequency ranging from 78MHz to 108MHz, with a 100 kHz channel selection resolution. Fabricated in stan
This paper presents a cost-efficient soft-output signal detector design solution targeting on the spatial-multiplexing MIMO system. The detector achieves low hardware cost and near-optimal detection performance based on the modification to the fixed-complexity sphere decoder (FSD) using several implementation-oriented algorithm-level improvements, which are early-pruning with polygon-shaped constr
Intense competition in rapidly changing markets puts intense pressure on product definition and the associated requirements engineering processes. An extensive literature review has identified that brand inertia, customer inertia, inappropriate market entry strategies and an inability to satisfy customer needs or expectations are the principle contributors to customer product rejection. While RE p
