Sökresultat

D:\Hållf\Exjobb\JörgenL_p12.pdf.pdf Copyright © 2003 by Div. of Solid Mechanics, Jörgen Larsson Printed by KFS i Lund AB, Lund, Sweden, 2003. For information, address: Division of Solid Mechanics, Lund University, Box 118, SE-221 00 Lund, Sweden. Homepage: www.solid.lth.se Division of Solid Mechanics Master’s Dissertation by Jörgen Larsson ANALYTICAL DIMENSIONING OF CASTING STRUCTURES IN DRAW DIES

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5102.pdf - 2026-06-22

Department of Mechanical Engineering Division of Solid Mechanics ISRN LUTFD2/TFHF--04/5106--SE (1-83) ON THE INTERNAL ARCHITECTURE OF BONE BASED ON A CONTINUUM MODEL Master’s Dissertation by Zoltán Habony Supervisors Ingrid Svensson, Div. of Solid Mechanics Magnus Tägil, Dep. of Orthopaedics, Lund University Hospital Ian McCarthy, Biomechanics Laboratory, Dep. of Orthopaedics, Lund University Hosp

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5106.pdf - 2026-06-22

C:/Report_050125/REPORT.dvi Department of Mechanical Engineering Solid Mechanics ISRN LUTFD2/TFHF–05/5111–SE(1–156) EVALUATING THE 3DM MODEL - AN EXPERIMENTAL AND FINITE ELEMENT STUDY Master’s Dissertation by Oscar Elison and Lars Hansson Supervisors Johan Tryding, Tetra Pak Magnus Just, Tetra Pak Anders Harrysson, Div. of Solid Mechanics Matti Ristinmaa, Div. of Solid Mechanics Copyright c© 2005

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5111.pdf - 2026-06-22

Department of Mechanical Engineering Solid Mechanics ISRN LUTFD2/TFHF–06/5115–SE(1–81) A SMALL DEFORMATION MODEL FOR THE ELASTO-PLASTIC BEHAVIOUR OF PAPER AND PAPERBOARD Master’s Thesis by Tomas Andersson Supervisors Mikael Nyg̊ards, STFI-Packforsk Anders Harrysson, Div. of Solid Mechanics Examiner Mathias Wallin, Div. of Solid Mechanics Copyright c© 2006 by Div. of Solid Mechanics, STFI-Packforsk

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5115.pdf - 2026-06-22

Microsoft Word - rapport_060602.doc Division of Solid Mechanics ISRN LUTFD2/TFHF--06/5117--SE (1-85) TOPOLOGY OPTIMIZATION OF A STAMPING DIE Master’s Dissertation by Frida Birath and Anna Nilsson Supervisors Håkan Carlsson, Altair Engineering Mats Sigvant, Volvo Cars Body Components Mathias Wallin, Div. of Solid Mechanics Magnus Fredriksson, Div. of Solid Mechanics Copyright © 2006 by Div. of Soli

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5117.pdf - 2026-06-22

Department of Mechanical Engineering Solid Mechanics ISRN LUTFD2/TFHF-06/5122-SE(1-80) DROP TEST OF A SOFT BEVERAGE PACKAGE – EXPERIMENTAL TESTS AND A PARAMETER STUDY IN ABAQUS Master’s Dissertation by Johanna Lönn and Jenny Navréd Supervisors Eskil Andreasson, Tetra Pak R&D AB, Sweden Håkan Hallberg, Div. of Solid Mechanics, Lund University, Sweden Magnus Harrysson, Div. of Solid Mechanics, Lu

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5122.pdf - 2026-06-22

i Acknowledgement This Master Thesis project was carried out for Mack Trucks in Allentown, Pennsylvania in USA, and the Division of Solid Mechanics at Lund Institute of Technology from January to July 2006. We were very lucky to get the chance of doing thesis work at Mack Trucks, a genuine engineering company. The project we worked with involved different engineering areas and suited our education

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5124.pdf - 2026-06-22

Department of Construction Sciences Solid Mechanics ISRN LUTFD2/TFHF-07/5126-SE(1-81) INJECTION MOULDING SIMULATION -A finite element approach to analyse the thermodynamics in an IM tool Master’s Dissertation by Rikard Johansson and Daniel Konijnendijk Supervisors Pär Andersson, Tetra Pak Packaging Solutions AB, Sweden Eskil Andreasson, Tetra Pak Packaging Solutions AB, Sweden Anders Harrysson, D

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5126.pdf - 2026-06-22

rapport.dvi Department of Construction Sciences Solid Mechanics ISRN LUTFD2/TFHF–07/5128-SE(1-60) AN IMPLEMENTATION OF MESH FREE METHODS FOR MECHANICAL PROBLEMS AT LARGE STRAINS Master Thesis by VIKTOR PETERSSON SUPERVISOR PH. D. PAUL HÅKANSSON EXAMINER PROF. MATTI RISTINMAA Copyright c© 2007 by Div. of Solid Mechanics, Viktor Petersson Printed by Media-Tryck, Lund ,Sweden For information, addres

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5128.pdf - 2026-06-22

Division of Solid Mechanics ISRN LUTFD2/TFHF11/5159SE (1-97) INVERSE MODELING OF POLYMER MATERIALS Master's Dissertation by Kent Bengtsson and Andreas Holmgren Supervisors Lic. Tech. Anders Harrysson, Tetra Pak, Lund Ph. D. Mathias Wallin, Div. of Solid Mechanics, Lund Examiner Prof. Matti Ristinmaa, Div. of Solid Mechanics, Lund Copyright c© by Div. of solid Mechanics, Tetra Pak, Kent Bengtsson a

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5159.pdf - 2026-06-22

() Department of Construction Sciences Solid Mechanics ISRN LUTFD2/TFHF–10/5160-SE(1-34) GPU parallelization of crystal plasticity FE analyses Master Thesis by Per Johansson SUPERVISOR HÅKAN HALLBERG AND YLVA MELLBIN, DIV. OF SOLID MECHANICS EXAMINER PROF. MATTI RISTINMAA, DIV. OF SOLID MECHANICS Copyright c© 2011 by Div. of Solid Mechanics and Per Johansson Printed by Media-Tryck, Lund ,Sweden Fo

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5160.pdf - 2026-06-22

Microsoft Word - Numerical analysis of a BPHE plate section.docx Division of Solid Mechanics ISRN LUTFD2/TFHF-11/5162-SE(1-104) Numerical analysis of a BPHE channel plate section Master thesis by Björn Persson Supervisors M.Sc Lennie Liegnell, SWEP international AB Prof. Per Ståhle, Div. of Solid Mechanics Copyright ©2011 by Div. of Solid Mechanics, SWEP international AB Björn Persson Printed by M

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5162.pdf - 2026-06-22

Report_Public.dvi Department of Construction Sciences Division of Solid Mechanics ISRN LUTFD2/TFHF–12/5164-SE(1-74) Experimental studies and modelling of pressboard Master’s thesis by Jonas Engqvist SUPERVISOR DOCENT MATHIAS WALLIN, DIV. OF SOLID MECHANICS PH.D. PER HÅRD AF SEGERSTAD, ABB CORPORATE RESEARCH EXAMINER PROF. MATTI RISTINMAA, DIV. OF SOLID MECHANICS Copyright c© 2012 by Div. of Solid

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5164.pdf - 2026-06-22

Microsoft Word - Prosthesis_attachment_device_for_individuals_with_trans-radial_amputations_PRINT.docx Division  of  Solid  Mechanics     ISRN LUTFD2/TFHF--12/5166--SE (1-103)             PROSTHESIS  ATTACHMENT  DEVICE  FOR   INDIVIDUALS  WITH  TRANS-­‐RADIAL     AMPUTATIONS           Master’s  Dissertation  by   Lukasz  Szychlinski       Supervisors   Ingrid  Svensson,  Div.  of  Solid  Mechanics

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5166.pdf - 2026-06-22

Department of Construction Sciences Solid Mechanics ISRN LUTFD2/TFHF-14/5186-SE(1-84) XFEM - Analysis and Implementation Master’s Dissertation by Simon Arnesson Supervisors: Matti Ristinmaa, Division of Solid Mechanics Examiner: Mathias Wallin , Division of Solid Mechanics Copyright c© 2014 by the Division of Solid Mechanics and Simon Arnesson Printed by Media-Tryck AB, Lund, Sweden For informatio

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5186.pdf - 2026-06-22

Svenska som andraspråk: Självständigt arbete (examensarbete) för ämneslärare, GY | Institutionen för utbildningsvetenskap

https://www.uvet.lu.se/kurs/%C3%84SAM12 - 2026-06-22

AskfeltXjobb.dvi Department of Constru tion S ien esSolid Me hani sISRN LUTFD2/TFHF10/5153-SE(1-56) A TOPOLOGY OPTIMIZATION METHODBASED ON THE CAHN-HILLIARD MODEL Master Thesis byHENRIK ASKFELTSUPERVISORDOCENT MATHIAS WALLIN, DIV. OF SOLID MECHANICS EXAMINERPROF. MATTI RISTINMAA, DIV. OF SOLID MECHANICSCopyright © 2010 by Div. of Solid Me hani s and Henrik AskfeltPrinted by Media-Try k, Lund ,Swed

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF-5153.pdf - 2026-06-22

Preface Fracture Analysis of Adhesive Joints using the Finite Element Method Per Hansson February 2002 Thesis for the Degree of Master of Science Division of Solid Mechanics Lund Institute of Technology Division of Solid Mechanics ISRN LUTFD2/TFHF--02/5093--SE (1-54) FRACTURE ANALYSIS OF ADHESIVE JOINTS USING THE FINITE ELEMENT METHOD Master’s Dissertation by Per Hansson Supervisors Solveig Melin,

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5093.pdf - 2026-06-22

Department of Mechanical Engineering Division of Solid Mechanics ISRN LUTFD2/TFHF--02/5095--SE (1-67) ADAPTIVE BONE REMODELLING Master’s Dissertation by Magnus Harrysson Supervisors Ingrid Svensson, Div. of Solid Mechanics Ian McCarthy, Biomechanics Laboratory, Dep. Of Orthopaedics, Lund University Hospital Copyright © 2002 by Div. of Solid Mechanics, Magnus Harrysson For information, address: Div

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5095.pdf - 2026-06-22

Department of Mechanical Engineering Division of Solid Mechanics ISRN LUTFD2/TFHF--03/5101--SE (1-63) MECHANICAL ANALYSIS OF A NONBRIDGING EXTERNAL FIXATION DEVICE Master’s Dissertation by Hans Johansson and Fredrik Waldemarsson Copyright © 2003 by Div. of Solid Mechanics, Hans Johansson and Fredrik Waldemarsson For information, address: Division of Solid Mechanics, Lund University, Box 118, SE-22

https://www.solid.lth.se/fileadmin/hallfasthetslara/utbildning/examensarbete/TFHF5101.pdf - 2026-06-22