Filetype
This paper presents a 1MHz bandwidth, ΔƩ fractional-N PLL as the frequency synthesizer for LTE. A noise cancellation path composed of a novel hybrid ΔƩ DAC with 9 output bits is incorporated into the PLL in order to cancel the out-of-band phase noise caused by the quantization error. Further, a re-timing circuit is proposed to reduce the nonlinearity in the Charge Pump and provide pulse shaping si
This paper presents a low latency, high throughput soft-output signal detector for a 4x4 64-QAM spatial-multiplexing MIMO system. To achieve high data-level parallelism and accurate soft information, the detector adopts a channel-adaptive node perturbation technique to generate a list of candidate vectors around an initial linear estimation. The detection algorithm provides a large range and conve
In telecommunication networks based on the current Ethernet technology, routing of traffic demands is based on multiple spanning trees: the network operator configures different routing spanning trees and assigns each demand to be routed in one of the selected spanning trees. A major optimization issue in this solution is the combined determination of (i) a set of appropriate spanning trees, and (
This paper presents the VLSI design of an energy-efficient, high-throughput soft-input soft-output signal detector for iterative multiple-input multiple-output (MIMO) receiver. The detector is evolved from our previously developed imbalanced fixed complexity sphere decoder and adopts several new algorithm-level techniques to exploit the available a priori information of transmitted bits. More spec
This paper describes a hardware efficient linear pre-coder for Massive MIMO Base Stations (BSs) comprising a very large number of antennas, say, in the order of 100s, serving multiple users simultaneously. To avoid hardware demanding direct matrix inversions required for the Zero-Forcing (ZF) pre-coder, we use low complexity Neumann series based approximations. Furthermore, we propose a method to
Vehicles in the future are anticipated to have the ability to communicate and exchange useful information in order to avoid collisions. However, for this cooperation to be possible, all vehicles will have to be equipped with compatible wireless modules, based on, e.g. IEEE 802.11p (used in ITS-G5 or WAVE), which implements intelligent transport systems operating in the 5 GHz frequency band. During
Weak alignment of requirements engineering (RE) with verification and validation (VV) may lead to problems in delivering the required products in time with the right quality. For example, weak communication of requirements changes to testers may result in lack of verification of new requirements and incorrect verification of old invalid requirements, leading to software quality problems, wasted ef
Pathloss is typically modeled using a log-distance power law with a large-scale fading term that is log-normal. However, the received signal is affected by the dynamic range and noise floor of the measurement system used to sound the channel, which can cause measurement samples to be truncated or censored. If the information about the censored samples is not included in the estimation method, as i
Recent work has shown that, with the help of the Theory of Characteristic Modes (TCM), minor modifications of the terminal chassis can facilitate the design of orthogonal MIMO antennas with viable bandwidth at frequencies below 1 GHz. Herein, a new framework is proposed to further exploit TCM to enhance the performance of the orthogonal MIMO antennas. By correlating the characteristic currents and
The post-failure convergence of shortest path routing (SPR) protocols used in IP networks can be too slow to meet the restrictive requirements (i.e. maximum allowable delay, jitter, etc.) of the multimedia services and therefore new protection/restoration mechanisms combined with IP routing are of interest. The article addresses the optimization of three potential rerouting mechanisms based on the
In this paper we establish a geometry-based stochastic ultra-wideband channel model for outdoor infostations scenarios. We statistically describe the location and strength of clusters of scatterers, as well as the shape and width of visibility and shadowing regions. We also separately model diffuse radiation (which cannot be explained by the scatterer components), and show that its fading statisti
Effective requirements engineering (RE) can support efficient development of successful products. However, assessing and improving how RE supports its context, i.e. the development life cycle, is non-trivial since many different roles and factors are involved over a long period of time. Project retrospectives may support project teams in reflecting on how requirements are agreed upon and communica
Background: The popularity of the open source software development in the last decade, has brought about an increased interest from the industry on how to use open source components, participate in the open source community, build business models around this type of software development, and learn more about open source development methodologies. Aim: The aim of this study is to review research ca
We consider a window decoding scheme for Braided Convolutional Codes (BCCs) based on the BCJR algorithm. We describe the principle of this decoding scheme and show that BCCs with window decoding exhibit excellent performance. The tradeoff between performance and decoding latency is examined and, to reduce decoding complexity, both uniform and nonuniform message passing schedules within the decodin
This paper presents an efficient technique to enhance the isolation between two closely spaced PIFAs for MIMO mobile terminals. The proposed decoupling method is based on a T-shape slot impedance transformer and it enables an inter-PIFA spacing of 1 mm to be achieved. The 10 dB impedance bandwidth and 20 dB isolation bandwidth cover the 2.4 GHz WLAN band (2.4-2.48 GHz), with a maximum isolation of
