Filetype
We propose a multivariate log-normal distribution to jointly model received power, mean delay, and root mean square (rms) delay spread of wideband radio channels, referred to as the standardized temporal moments. The model is validated using experimental data collected from five different measurement campaigns (four indoor scenarios and one outdoor scenario). We observe that the received power, th
Due to the decrease in cost, size, and weight, unmanned aerial vehicles (UAVs) are becoming more and more popular for general-purpose civil and commercial applications. Provision of communication services to UAVs both for user data and control messaging by using off-the-shelf terrestrial cellular deployments introduces several technical challenges. In this article, an approach to the air-to-ground
This paper investigates the wideband channel characteristics obtained in a classroom and a hall indoor scenarios at 2-4, 9-11 and 27-29GHz. A virtual uniform circular array (UCA) based channel sounding system was utilized to capture wideband spatial channel characteristics. The propagation parameters of multipath components (MPCs) were estimated by using a high resolution parameter estimation (HRP
In parallel with the decrease in cost, size and weight of Unmanned Aerial Vehicles (UAVs) and the increase of their flight autonomy, many commercial applications are rapidly arising. Most of those applications rely on a communications system between a terrestrial base station and the UAV. Due to the UAV movement, time-variant channel models are required. In this article, we propose a geometrical m
In a wireless communication system, the radio propagation channel is a complicated component to characterise. Channel sounding equipment thus has to meet specific criteria to extract the desired channel parameters. In this study, the authors outline the development and validation of a vector network analyser (VNA) based channel sounder for the frequency range from 1 to 50 GHz using radio-over-fibr
Millimeter-wave with ultrawide bandwidth available and ability to pack massive number of antennas in a small area is considered the key enabler for future generation communication systems. Accurate understanding and modeling of the ultrawideband propagation channel with large-scale array configuration is essential. In this contribution, a realistic spherical-propagation signal model considering th
Massive multiple-input multiple-output (MIMO) is a key technology for 5G wireless communications since it can improve network throughput, capacity, spatial efficiency, etc. utilizing large-scale antenna arrays. In this paper, we study the direction of departure (DOD) and direction of arrival (DOA) power spectra and the angular spreads for suburban line-of-sight (LoS) environment. Our study is base
The unmanned-aerial-vehicle (UAV) has attracted great interests in both civil and military applications, due to its low cost, flexibility and ability to establish seamless coverage. In this paper, a Universal Software-defined Radio Peripheral (USRP) based channel sounding system for characterizing the UAV communication channel is introduced, which can be applied in both active and passive measurem
In this article, a novel vector network analyzer (VNA)-based ultrawideband (UWB) channel sounder using radio-over-fiber (RoF) techniques is presented. Benefiting from the usage of optical fiber cable, the measurement range and the dynamic range are significantly increased compared with the conventional coaxial-based VNA system. Specifically, using RoF increases the dynamic range to a maximum of 11
Low altitude unmanned aerial vehicle (UAV)-aided applications are promising in the future generation communication systems. In this paper, a recently conducted measurement campaign for characterizing the low-altitude air-to-ground (A2G) channel in a typical Long Term Evolution (LTE) network is introduced. Five horizontal flights at the heights of 15, 30, 50, 75, and 100 m are applied, respectively
Vector network analyzer (VNA) has been extensively utilized for radio channel sounding purposes. Due to its slow channel sounding speed, it has been mainly used for channel measurements in static propagation scenarios. The main limitation with VNA based channel sounder is its small measurement range, due to signal attenuation in the coaxial cable setup. Employing radio over fiber (RoF) can effecti
Air-to-ground (A2G) communication is envisioned to support numerous applications in 5G wireless networks. In this paper, an active measurement campaign for unmanned aerial vehicle (UAV) channels is introduced. Simulation based on Graph Model (GM) is also conducted for this specific measurement. Both the measured and simulated channel impulse responses (CIRs) are extracted. Based on the CIRs, the m
This paper presents the characteristics of the mm-wave propagation channel in hall scenario at the frequency bands of 9-11 GHz and 27-29 GHz. The spherical propagation parameters, i.e. delay, azimuth, elevation, source distance and complex amplitude are estimated by the high resolution parameter estimation (HRPE) algorithm. Based on the results, the channel characteristics, e.g. path loss, delay s
In this paper, a recently conducted measurement campaign for unmanned-aerial-vehicle channels is introduced. The downlink signals of an in-service long-time-evolution network, which is deployed in a suburban scenario were acquired. Five horizontal and five vertical flight routes were considered. The channel impulse responses (CIRs) are extracted from the received data by exploiting the cell-specif
In this paper, a recently conducted measurement campaign for vehicle-to-vehicle (V2V) propagation channel characterization is introduced. Two vehicles carrying a transmitter and a receiver, respectively, have been driven along an eight-lane road with heavy traffic. The measurement was conducted with 100 MHz signal bandwidth at a carrier frequency of 5.9 GHz. Channels are observed consisting of two
In this work, a recently conducted measurement campaign for millimeter wave (mm-wave) vehicle to vehicle (V2V) propagation channel characterization is introduced. Two vehicles carrying a transmitter (Tx) and a receiver (Rx) respectively were driven towards each other at an average speed of 60 km/h in an urban area of Jiading District, Shanghai, China. The measurement was conducted with 409.6 MHz b
In this paper, a novel approach of channel modeling based on big data analysis is proposed that is applied to extract air-to-ground channel models from down-link signals collected by using an Unmanned Aerial Vehicle (UAV) in operating Long-Term-Evolution (LTE) networks. In this approach, the most "sensitive" channel parameter to the UAV height is chosen based on a feature selection algorithm from
The increasing requirement for the mobile data traffic accelerates the research of millimeter-wave (mm-wave) for future wireless systems. Accurate characterization of the mm-wave propagation channel is fundamental and essential for the system design and performance evaluation. In this paper, we conducted measurement campaigns in various indoor scenarios, including classroom, office, and hall scena
Power control is becoming increasingly essential for the fifth-generation (5G) and beyond systems. An example use-case, among others, is the unmanned-aerial-vehicle (UAV) communications where the nearly line-of-sight (LoS) radio channels may result in very low signal-to-interference-plus-noise ratios (SINRs). The authors in (Chiang et al., 2007) proposed to efficiently and reliably solve this kind
As human's marine activities, such as marine aquaculture, ocean shipping and coastal facilities construction, flourished world-widely, it is required to monitor the sea-wave dynamics timely and accurately. The radar introduced in this paper, namely “Sea-wave-dynamics Monitoring and Imaging System (SMIS)”, working in the S-band at the center frequency of 3.1 GHz, is applicable to retrieving sea-wav
